Monitor the carbon dioxide (CO₂), temperature and humidity in your facility wherever you are, and change targets and alarms remotely. Anka Sense devices measure, control and keep you informed.
Anka Sense is an IoT (Internet of Things) device: it processes sensor readings, runs your equipment and delivers the data to you over the internet, bringing remote measurement and remote control together in one system.
Live monitoring
CO₂, temperature and humidity in real time in the mobile app and at portal.ankasmart.com.
Remote control
Change targets, operating modes and alarm thresholds remotely.
Instant alarms
You get a notification on your phone when a limit is crossed.
Logging and reports
24 hours of logging on the device (every 20 s) and up to 60 days of history in the app.
Works offline too
Control runs on the device, so measurement and relay control continue if the internet goes down.
Expandable
Multiple sensor kits over Modbus, and wireless wide-area monitoring with LoRa.
anka sense portal
Inside the portal
All your devices at a glance
Each room is a card: CO₂, temperature, humidity and the second temperature sensor, live, together with whether the device is online.
Change settings remotely
Enter high and low limits, on and off times and alarm thresholds for CO₂, temperature and humidity, then send them to the device with one click.
Never miss an alarm
When a value crosses its limit or a device stops sending data, you are notified in the portal, by email or on Telegram. Every alarm is listed with its start and end time.
See the history in charts
Follow how CO₂, temperature and humidity change over days in charts, and see which settings work.
How it works
Measurement: Anka Sense sensor kits measure CO₂ (NDIR), temperature and humidity; they connect with an RJ45 cable and are powered by the main device.
Control: Anka Sense S compares readings with your targets and runs ventilation, heating, cooling and humidification through its 4 relay outputs.
Connectivity: The device connects to the internet over 2.4 GHz Wi-Fi.
Remote access: Use the mobile app and portal.ankasmart.com to monitor and manage.
Anka Sense devices connect to the internet over built-in 2.4 GHz Wi-Fi. In the mobile app and at portal.ankasmart.com you can watch live values, change settings and manage alarms.
What happens if the internet goes down?
Control runs on the device itself: Anka Sense keeps measuring and running the relays without a connection, and stores readings every 20 seconds for 24 hours.
How far back can I see data?
The mobile app shows up to 60 days of history and reports.
What about large sites without Wi-Fi coverage?
For large sites where running cables is difficult there are long-range Anka LoRa sensors and a LoRa gateway; to connect several sensor kits to one device there is the Modbus-based Anka MB Hub.
Start managing your facility remotely
Tell us how many points you want to monitor and which equipment to control, and we'll plan the right IoT setup for you.
